My sensor don't show zero en x-axis
2 posters
Page 1 of 1
My sensor don't show zero en x-axis
Hi,
thanks very much, your response we clarified many things...
but we have a complication ...
We tested the sensor but it always shows a value on the x axis
suppose that because the sensor is not exactly parallel to the ground
there is a solution for this that does not involve using a stabilized platform
we are developing an inertial navigation system for a robot ....
thank you very much for the help
thanks very much, your response we clarified many things...
but we have a complication ...
We tested the sensor but it always shows a value on the x axis
suppose that because the sensor is not exactly parallel to the ground
there is a solution for this that does not involve using a stabilized platform
we are developing an inertial navigation system for a robot ....
thank you very much for the help
luchoaqp- Posts : 2
Join date : 2011-08-13
Re: My sensor don't show zero en x-axis
The accelerator sensor is not a precision instrument.
Just subtract the not-0 value from the x-readings.
Just subtract the not-0 value from the x-readings.
Niels- Posts : 19
Join date : 2011-07-15
Similar topics
» NXT Color Sensor
» Example of how to use the NXT Acceleration / Tilt Sensor
» Sensor Events not working when using CONTROLLED_MOTORCMD
» Example of how to use the NXT Acceleration / Tilt Sensor
» Sensor Events not working when using CONTROLLED_MOTORCMD
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|